Built By General Contractors · Tailored for Mid-Level Builders Request Contractor Access
BuildOperations Ops · Level Two

The tour showed you where.This shows you how.

Eight hands-on lessons that walk real jobs through the system, start to finish. Work them in order your first week; after that, keep this open as the reference when something only comes up once a month.

BuildOperations Ops app icon
BuildOperations Ops · Training

Lessons 1–4: what you'll touch every day.

These four cover the loop the business runs on: the morning board, new inquiries, money going out, and crew hours coming in.

1
Lesson · Active Jobs

Run the morning board

Goal: know what's happening on every site today before you finish your coffee.

  1. Open /admin and enter your PIN. You land on Active Jobs.
  2. Scan the stage-gate kanban. Each card is a live job; the column it's in is the phase it's in. Drag a card right when a phase completes.
  3. Check the badge count on the tab. That's jobs needing attention, not total jobs.
  4. Open the Multi-Week Trade Gantt below the kanban to see crew capacity. Use the horizon controls to zoom between weeks.
  5. Tap a job card to open its hub: scope, budget, documents, and the running Daily Field Notes log. Add a note from your phone while you're standing on site.
Field habit: the store runner list lives on this tab too. Log material pickups here so the receipt and the job stay married.
2
Lesson · Intake

Work a new inquiry to a signed quote

Goal: take a website estimate request from "new" to a scheduled job without retyping anything.

  1. Go to the Intake tab. Website estimate requests land here automatically, newest on top.
  2. Filter with the chips above the list (New, Contacted, Walkthrough) to see what needs a callback.
  3. Open the inquiry's Lead Hub: contact info, project type, ballpark range they saw, and any photos they attached.
  4. Call the homeowner, then hit Schedule Walkthrough to book the site visit on the calendar. Rescheduling later uses the same modal.
  5. After the walkthrough, enter scope notes and open the Quote Builder from the hub. Build the quote from the service catalog, save it, and it goes out for client sign-off.
  6. When the client approves, the inquiry converts into a job on the Active Jobs board. Nothing gets re-entered.
Why it matters: every step leaves a trail on the lead record, so when the homeowner calls back in six months you'll know exactly what they were quoted and why.
3
Lesson · Financials

Put an expense on the books

Goal: get a Home Depot run or a supplier invoice onto the right job's P&L in under a minute.

  1. On Financials, hit Add Project Expense.
  2. Pick the job and, if it's a subcontractor cost, the vendor it belongs to.
  3. Attach the receipt: photograph a paper slip from your phone, or upload a PDF invoice. Multi-page PDFs parse page by page, and line items extract automatically.
  4. Check the extracted amount and date, fix anything the OCR misread, then save. The expense hits the job's cost column immediately.
  5. When you actually pay it, open Record Payment on the expense so the books show what went out and when.
Tax-time gift to yourself: expenses filed this way flow into the 1099 report, the profitability matrix, and the QuickBooks export with zero extra work.
4
Lesson · Financials

Approve the crew's week

Goal: clear subcontractor timecards before Friday without a spreadsheet.

  1. On Financials, find the Timesheet & Shift Approvals inbox. Shifts crew members clock in the field app queue here.
  2. Review each shift: who, which job, hours, and the GPS clock-in location.
  3. Approve clean shifts individually, or use Approve All when the week's tight.
  4. Hours on the wrong job? Reassign the shift to the right project instead of rejecting it.
  5. Something looks off? Reject with a note so the sub sees why on their end.
  6. Approved hours flow into the profitability matrix and each vendor's pay record automatically.
Rule of thumb: approve or reassign, almost never reject silently. A rejected shift with no note becomes a phone call you'll have anyway.

Lessons 5–8: once per vendor, job, and client.

Less frequent, but these are the steps that keep the company protected and the paperwork findable.

5
Lesson · Labor & Trade

Onboard a subcontractor

Goal: add a sub with their paperwork and field access sorted in one sitting.

  1. On Labor & Trade, hit Add Vendor. Fill in the business name, trade, rate, and contact info, then Save Vendor at the bottom of the form.
  2. Scroll to the W-9 section and upload their W-9 PDF. It stores in the private document vault, not in a spreadsheet or email thread.
  3. Add COI details: GL and workers' comp carriers, policy numbers, and expiration dates, plus the COI document itself.
  4. On their vendor card, hit Crew Link to generate their personal PIN and sign-in link for BuildOperations Crew. Text it to them.
  5. Check the compliance strip on the card: a quiet W-9 check means filed, a gold flag means missing, a red flag means an expired COI.
Compliance rule: no W-9 on file, no 1099 readiness, no exceptions. The card will keep flagging it until it's handled, which is the point.
6
Lesson · Documents

Paper the job

Goal: generate the four documents that keep money and liability clean on every job.

  1. Quote: build it from the Lead Hub's Quote Builder (Lesson 2). Services pull from the catalog, so pricing stays consistent.
  2. Change order: when scope shifts mid-job, open a change order on the same record instead of editing the signed quote. The original stays intact.
  3. Purchase order: build the material list on the job, generate the PO, and send it to the supplier. Print view doubles as save-to-PDF.
  4. Lien waiver: from any vendor card or subcontractor expense, hit Lien Waiver. The waiver form fills itself from the job and payment data.
  5. Have the sub sign digitally. Signed waivers file against the vendor, the job, and the payment, all three.
Draw-day habit: collect the waiver when you release the check, not three weeks later when the title company asks. One click, same screen.
7
Lesson · Media

Publish the win

Goal: turn jobsite photos into portfolio pieces without touching website code.

  1. On the Media tab, use Upload Job Photos & Walkthrough Videos and tag the upload to its project.
  2. Photos and videos land in the media library, organized by job, stored privately by default.
  3. Pick the best before-and-afters and flag them for the Live Portfolio Gallery. Approved items feed the public gallery on the website.
  4. Crew members can upload from the field app too, so photos arrive tagged to the right job instead of lost in a camera roll.
Marketing math: three good photos per finished job is all the gallery needs. The intake-to-review pipeline does the rest.
8
Lesson · Client Directory

Close the loop after the job

Goal: turn a finished project into a five-star review and the next referral.

  1. Open the client's record in Client Directory. Their full project history, service tickets, and product memory live here.
  2. Log final details into Product Memory: paint codes, fixture models, tile lines. This is the gold when they call in two years.
  3. Use the Google Review pipeline to send the review ask while the kitchen still smells new.
  4. Set a nurture trigger for seasonal follow-up so past clients hear from you before they need you.
  5. Warranty issue later? Open a service ticket on their record so callback work is tracked like a job, not a favor.
The compounding part: paint codes and product memory feel like busywork until a client's "match the hallway" request takes you ninety seconds instead of two site visits.

Month-end and year-end routine.

The jobs above keep the days running. This checklist is the loop that keeps the books and the business honest.

Last business day of the month

About twenty minutes if the daily habits held. All of it lives under Admin Tools or Financials.

Reconcile expenses. Scan Financials for uncategorized or receipt-less expenses and clean them up while the month is fresh.
Run the profitability matrix. Sort by margin. Anything trending negative gets a conversation next week, not next quarter.
Update the mileage log. Owner business mileage for the month, entered once, deducted once, forgotten until April.
Pull the monthly report. Admin Tools, Monthly Performance Report: web traffic, lead flow, and business results in one PDF.
Export leads if needed. Joist-compatible CSV for the accountant or your own spreadsheet archive.
Check the intake pipeline. Zero inquiries sitting in New is the goal. Anything unanswered is a lead going cold.

January, once a year

The tax-season pull. If W-9s and expenses stayed clean all year, this is an hour, not a weekend.

Run the 1099-NEC report. Every sub paid over the threshold, totaled from their approved expenses and shifts.
Audit the document vault. W-9s and COIs current for anyone still on the trade list.
QuickBooks export. Hand the accountant a clean file instead of a shoebox.
Review storage. Check the Cloud Storage Plan under Admin Tools before media uploads hit the quota mid-project.
Stuck on a step? The tour page at /opstour covers where every feature lives. For anything the docs don't cover, contact your office admin.

Training wheels off.

Open Ops and run Lessons 1–4 on a real day. Everything else falls out of the routine.